Core parameters: Excitation method: spark; Detector: Photomultiplier tube; Focal length: 998.8mm; Number of lines: 2160gr/mm; Wavelength range: 170-780nm (vacuum), 190-780nm (air); Maximum number of channels: 48

Affordable, high precision, ultrafast simultaneous Carbon & Sulfur Analyzer

Instrument use The instrument is based on pyroelectric sensor and thermalconductivity detector technology. Inert gas fusion method is used torapidly measure oxygen and nitrogen content in steel, rare earth materials,alloys, copper, zirconium, titanium, ceramics, powder materials and otherinorganic materials.

Product overview ​In the process of metallographic sample preparation, the grinding and polishing of the sample is an essential process. After grinding and polishing, the surface of the sample can be obtained as bright as a mirror. OU6130 Metallographic sample polishing machine adopts a high-end touch screen, which can make the rotating speed of the grinding disc between 50-1000r/min. By replacing the metallographic sandpaper and polishing fabric, the grinding and polishing process of the sample can be completed, showing a wider range of applications. The shell adopts the whole blister, the appearance is novel, has the characteristics of smooth rotation, low noise, easy operation and high working efficiency, and has its own cooling device, which can cool the sample during grinding and polishing to prevent the damage of the metallographic structure due to overheating of the sample. It is suitable for metallographic laboratory in factories, colleges and universities, scientific research institutions, and is an excellent equipment for metallographic sample grinding and polishing.

Product overview OU6150 automatic metallographic grinding and polishing machine is a single-disc automatic grinding and polishing machine that integrates pre-grinding, grinding and polishing. It adopts single-chip microcomputer technology through touch screen control, grinding disc is driven by DC brushless motor, V belt is driven, grinding head is driven by stepper motor, synchronous belt is driven with smooth rotation, low noise, long life, safe and reliable; The speed of grinding head and grinding disc can be adjusted according to the needs of users, the pressure and sample preparation time can be set by themselves to adapt to different needs; With lighting system, easy to take samples; With its own cooling device, it can cool the sample during grinding to prevent the damage of the metallographic structure due to the overheating of the sample, which is an ideal choice for metallurgical sample making equipment in factories, scientific research units and universities.

Product overview Model OU6170 electrolytic polishing etch meter is a metallographic sample preparation instrument integrating electrolytic polishing and etching functions. Suitable for factories, colleges and universities, research institutions and other laboratory use. The equipment uses the electrochemical principle to prepare metallographic samples, without the deformation layer caused by mechanical polishing, has the advantages of fast sample preparation speed, good repeatability, etc., is the ideal equipment for nonferrous metal samples, steel, especially stainless steel to prepare metallographic samples. It is especially suitable for metallographic laboratory of factories, colleges and universities, scientific research units, and is the ideal equipment for metallographic specimen corrosion.

Product overview In the process of metallographic sample preparation, the cutting of sample materials is the first important process of sample preparation. OU6420 cutting machine can be used for cutting general metallographic and petrographic materials. In order to ensure that samples can be cut in absolute safety, the machine adopts a fully closed double shell structure and is equipped with a cooling water tank, which can make the configured coolant be recycled. In order to prolong the service life of the equipment and facilitate operation and maintenance, the main parts of the machine, such as the inner cover shell, the wheel shaft sleeve, the jaws and the work table, are made of corrosion-resistant materials, which is the ideal equipment for cutting samples. It is especially suitable for metallographic laboratory of factories, colleges and universities and scientific research units, and is metallographic sample cutting Ideal equipment for cutting.

Product overview OU6435 automatic metallographic cutting machine is controlled by PLC and touch screen, which has very high reliability and powerful control ability. The cutting machine can not only cut the circular workpiece with a diameter of 100mm, but also cut the rectangular sample with a height of 100mm and a width of 300mm. The machine adopts a completely closed structure, and the safety cover of the cutting room is equipped with a large observation window, which is convenient for users to observe the whole cutting process of the sample. Equipped with LED lighting system to achieve effective lighting of the entire cutting room; Equipped with circulating cooling system, it can ensure that the surface of the cut sample is bright, smooth and no burn; Suitable for cutting all kinds of metal, non-metal material samples, in order to observe the material metallographic, lithographic structure. It has the characteristics of automatic cutting process, low noise, easy operation, safety and reliability, etc. It is one of the necessary equipment for laboratory sample preparation.

OU6500 inverted metallographic microscope is mainly used to identify and analyze the internal structure of metals, this instrument is an important instrument for metallography research. Popular conventional application inverted metallographic microscope, conventional application inverted metallographic microscope, upgradable image processing and analysis system, enterprise physical and chemical rooms and colleges and universities are widely used.

The instrument analysis program is calibrated by Soohow Instrument using domestic and foreign certifiedstandards, which can meet almost all common grades. When users test special requirements (such as rare alloy grades, elements, content ranges, etc.)? it may leadto the absence of corresponding certification standards. If the customer can provide suitable standardsamples or reliable uniform samples with fixed values, Shuhao engineers can specially create analysisprograms for the user. The content of matrix elements is the total amount minus the content of other elements (100% - X content of other elements)

ATM X RAY–X - it is a new generation X-ray fluorescence spectrometer that solves a wide range of analytical tasks at a high level. It is equipped with a high-performance semiconductor detector with electronic cooling, an ultrashort low-loss light path, a high-voltage excitation source, an independent cooling air supply channel, an automatic vacuum/helium switching system and an automatic rotary carousel for multiple images (with the option of rotating the sample). ATM X RAY-X provides high sensitivity, accuracy, intelligence and efficiency than similar models. Main application: multi-element analysis of any material, including analysis of alloys, mining materials, detection of dangerous elements in food, feed, cosmetics, plastics.