ATM X RAY - X

The principle of operation

The principle of operation of the spectrometer is based on the analysis of the characteristic X-ray fluorescence spectra of radiation occurring in the measured sample under the influence of X-ray radiation.

The high-voltage power supply generator of the X-ray tube provides a stable supply voltage. X-ray tube radiation (primary X-ray radiation) irradiates the samples. The samples then emit fluorescent characteristic X-ray radiation. The fluorescent characteristic X-ray radiation of the sample is received by a semiconductor detector, amplified and fed into a multichannel pulse spectrometer compatible with a personal computer. Control of the spectrometer, selection of measurement modes and parameter control, processing of X-ray radiation spectra, obtaining measurement results in units of quantities characterizing the content of the component, or in intensities (relative intensities) of spectral lines of X-ray radiation is carried out using a computer using special programs.

General characteristics

Type: Energy Dispersive X-ray fluorescence Spectrometer

Model: ATM X RAY-X

Size: 650×565×390 mm;

Sample placement chamber size: Ø340×64(H) mm;

Weight: approx. 85 kg;

• Range of measured elements: from fluorine (F) to uranium (U) (depending on modification)

• Range of determination of the content of elements: ppm-99.99% (for different elements – different ranges)

• Simultaneous analysis of elements

• Measurement time: 60s - 200s

• Energy resolution of the detector: ≤129 eV

• Sample material: powder, solid, liquid

The measurement results in units of quantities characterizing the content of the component, or in the intensities (relative intensities) of spectral lines of X-ray radiation are carried out using a computer using special programs.

Configuration*

·      High-performance X-ray tube with ultra-thin window

·      Silicon Drift Detector SDD

·      Digital controller ADC

·      Advanced optical path

·      High signal-to-noise ratio preamplifier

·      Built-in high definition video camera

·      Automatic switching of collimators and filters

·      Carousel for multiple samples (with additional sample rotation system)

·      Automatic correction of the spectrum drift

·      Triple protection mode

·      Vacuum Pump with power Cable

·    USB cable, 2 pcs

·    USB 2.0 to RS485 Universal Cable

·    Suction bag

·    Sample spoon

·    Nylon tube

·    Film in a roll (0.08*220 m, 4 microns

·    Plastic pipette, (3 ml), 100 pcs

·    Reusable plastic cups for solid samples, 12 pcs (in box 17)

·    Disposable cups for liquid samples, 60 pcs (in box 63)

·    Holders for cups for liquid samples, 12 pcs

·    Steel rings for cups for liquid samples, 12 pcs

·    Instructions on the USB disk

*depending on the modification

Additional features

·           Single sample chamber and multi-sample chamber;

9/12/20-position carousel.

·           Switching between vacuum and helium by pressing a button;

To measure the contents of light elements in powders or liquids, you can use a switch between vacuuming (for powders) and helium supply (for liquids).

·           Universal intelligent testing system;

There is no need to choose different types of materials. Automatic detection of the material eliminates the human factor. This improves the accuracy of the analysis.

·      Detector protection and electromagnetic blocking;

The protective plate protects the detector window from damage due to improper operation. An electromagnetic lock prevents the lid from opening during analysis and radiation leakage.

·      Ultrashort optical path, ultra-low detection limit;

The ultrashort optical path and recommended filter combinations make it possible to determine the content of elements starting from F (fluorine), with a detection limit in light matrices for a number of elements of only 0.2 ppm.

·      Accurate quantitative and semi - quantitative analysis;

ROHS5.0, Composite analysis V4.0, Coating analysis, Intelligent analysis of an unknown sample using the FP method.